Sketch configurator

Before you start using the configurator, make sure you get familiar with the MiruMod by visiting the Documentation section

PARAMETER	CONFIG 1 (stick south)	CONFIG 2 (stick west)	CONFIG 3 (stick north)	CONFIG 4 (stick east)
Outdoor flight (Yes/No)
Outdoor hull (Yes/No)
Max. tilt (5-30°) (RTH will not work for cfgs with max. tilt < 12°)
Max. vertical speed (200-2000 mm/s)
Max. yaw (40-350 °/s)
Max. altitude (0.5-50 m, 0 - disable)
Animation (Yes/No)
Video autorecording (Yes/No) (NOOP on Drone 1 or Drone 2 without USB stick)
TX/RX disconnect action deferral (sec)

LAND and FM_x switch setup
Transmitter mode
Visible Low Battery Alert (1-60%, 0 - disabled)
GSWO output
GSWO output source
Turn off LED when airbone
RX type

* denotes default value. For input fields default value is displayed in tooltips (leave empty to restore default value).

If you like the MiruMod and would like to buy miru a beer or two for his great work you can do so using the PayPal "Donate" button below

MiruMod