MiruPCB

The one, the only, the original - MiruPCB by Miru himself! The solution for a painless implementation of the MiruMod.
It contains all the necessary components including Drone plug, LLC and USB port on one compact board smaller than Arduino Nano.

   

Click images to zoom.

All you have to do is to add receiver of your choice and you have a complete mod - just plug it into your AR.Drone and you are ready to fly.

Click image to zoom.

Here are some unique features of the MiruPCB

• small size 0.7" x 1.6" (18mm x 41mm) and light weight 3.5g
• basic configuration does not require wires
• integrated Logic Level Converter and connector for drone
• built in USB connection for software updates and SETUP mode
• auto detection of SETUP mode when USB port is plugged into computer
• serial bridge function for drone
• convenient connector points for GPS, I2C and remote activity LED

More details can be found in this MiruPCB manual.

If you like the MiruMod and would like to buy miru a beer or two for his great work you can do so using the PayPal "Donate" button below